Installation Guide For PF_RING
Below you can find an installation guide for PF_RING written by Gunjan Bansal.
The original blog entry can be found at this URL.
————-
Hi,
This is my first guide so please bear with me for any disrespencies.
These steps were tested on Intel Core 2 Duo machine with 4 GB Ram and Intel(R) PRO/1000 Network Card , with Ubuntu 9.10 installed.This guide explains the installation procedure for Version 4.3.1
PF_RING implementation by Luca Deri is a great method for efficient Packet Capture on Commodity Hardware.It can be found on /PF_RING.html
I made a clean install,no other packages were installed other than mentioned.
- Uninstall libpcap and other dependent applications/library using syanptic or apt-get
- Install subversion(For fetching latest source codes),flexand bison(Required to recompile pf_ring aware pcap),ethtool(if not preinstalled,required for some basic Nic info of your computer)
-
Use Subversion to fetch source codes
svn co https://github.com/ntop/PF_RING PF_RING
ethtool -i eth0 #change eth0 to your ethernet card Sample
driver: e1000e
version: 1.0.2-k2
firmware-version: 0.4-3
bus-info: 0000:00:19.0 use man ethtool for more information on how to use ethtool As of version 4.3.1 PF_RING can be fully exploited only on the PF_RING aware device drivers.The modified device drivers for some of the popular network cards can be found in PF_RING/drivers .
These are modified version of the drivers supplied from respective companies.(Might be a bit older sometimes but will work)
-
Unload the ethernet card driver (this is shown in the first line of output of above command
sudo rmmod e1000e
Latter is also wrong but will do the job . The reason for such a thing is better explained by the difference in the command “sudo” and “sudo -s” . This can be found at https://web.archive.org/web/20230627150130/https://ubuntuforums.org/showthread.php?t=983645 , or searching for “difference between sudo and sudo -s” on our favorite google
-
Now install the newly build source
sudo make install
-
One bizarre thing that I observed is that the make install copies pfring.h to /usr/local/include but leaves the other
dependent files these are :-
- pfring_e1000e_dna.c
- pfring_e1000e_dna.h
cp pfring_e1000e_dna.h /usr/local/include Now we have to compile PF_RING aware pcap library . Change the working directory to userland/libpcap-1.0.0-ringcd ../libpcap-1.0.0-ring/ Configure ./configure Build the sources make Install pf_ring aware libpcap sudo make install Now we need to install the device driver(pf_ring aware).Change the working directory to drivers///src
In my case it is “drivers/intel/e1000e-1.0.15/src“ cd ../../drivers/intel/e1000e-1.0.15/src Build the source make Install the driver sudo make install Now we need to activate PF_RING if its not already activated . You can use lsmod to check if pf_ring is started or not.Change the working diectory to /lib/modules//kernel/net/pf_ring . cd /lib/modules/2.6.31-14-generic/kernel/net/pf_ring
Use uname -r to get the kernel version Enable PF_RING(if already enabled you can disable it using sudo rmmod pf_ring)
sudo insmod pf_ring.ko transparent_mode=1 More on transparent mode can be found at /blog/?p=56 Now enable to enable your driver go to /lib/modules//kernel/drivers/net/e100e cd /lib/modules/2.6.31-14-generic/kernel/drivers/net/e1000e Enable the driver
sudo insmod e1000e.ko
- Now you can start working on your PF_RING application.You will have to recompile many applications such as tcpdump(modified included),network manager etc. Google for doing so 🙂