4. Light View

When ntopng monitors more than one network interface (e.g. when multiple ZMQ endpoints are used for load-balancing flows for scaling at high flow rates, or when multiple packet interfaces or streams are configured for processing high packet rates), the Interfaces dropdown menu in the top toolbar lists an additional Overview entry. Selecting it switches the web GUI to a light view that combines the data of all the local interfaces of the ntopng instance, so that a single page shows the overall picture instead of one interface at a time.

Overview entry in the Interfaces dropdown

The Overview entry in the Interfaces dropdown

This light view does not require any configuration: it is computed on demand from the interfaces ntopng is already monitoring. It is not an interface itself, nothing is added to the command line, and no extra traffic processing takes place in the background. This is the main difference with View Interfaces, which are created via the command line and merge traffic of the underlying interfaces into a real logical interface.

The Overview entry is shown in the dropdown when:

  • ntopng monitors two or more interfaces (the System Interface is not counted), and

  • no View Interface is configured. When a View Interface exists, that is the intended way to see aggregated data, and the Overview entry is hidden.

While Overview is selected, the menu only shows the pages that are able to combine data of all the interfaces:

The other menu entries are disabled with the Not available in Overview hint; select a regular interface from the dropdown to access them.

4.1. Dashboard

This light view has its own live dashboard. Counters, charts and tables are computed by querying every local interface and merging the results:

  • the Total Throughput, Active Local Hosts and Active Flows counters are the sum of all the interfaces;

  • the Interfaces Traffic chart shows the total traffic (sent and received) of all the interfaces;

  • the Top Local Hosts and Top Remote Hosts tables report, next to each host, the name of the interface where the host has been seen (e.g. develac [enp1s0]). Clicking a host opens its details page on that interface.

Overview Dashboard

Overview Dashboard

4.3. Report

The Report (Dashboard menu) summarizes the traffic of all the interfaces in the selected time range: total, ingress and egress bytes, top categories, applications and protocols, flow quality, top local and remote hosts, top clients and servers, top networks and countries, and the traffic chart. It works as the Traffic Report of a single interface, with the Any Interface option always enabled: the values are computed once on the flows of all the interfaces, so each host, network or country is listed once with its total.

Report in the light view

Report on the traffic of all the interfaces

Time range, report templates, filters and the other report actions work as for a regular interface. As the report is built from the flows stored in the database, it needs ClickHouse.

4.4. Historical Flows

The Historical Flows Explorer lists the flows (connections) stored in ClickHouse for all the interfaces. The Interface column reports the interface where each flow has been seen. Queries, filters, the top lists (applications, protocols, clients, servers, …) and the flow details work on the flows of all the interfaces.

Historical Flows in the light view

Historical Flows of all the interfaces

4.5. Interface Details

The Interface Details page reports the totals of all the local interfaces: traffic, packets, drops, flows, flow exporters and probes (for collector interfaces), database export statistics and alert counters. The list of the interfaces being aggregated is reported at the top of the page, in place of the identity information (name, MAC address, speed, etc.) of a single interface. Counters are refreshed automatically as for a regular interface.

Interface Details in the light view

Interface Details of all the interfaces

Only the information that can be meaningfully summed is shown. Per-interface sections, such as storage utilization, traffic recording, live capture and the traffic breakdown charts, are available by selecting the actual interface.

The Reset Counters action resets the counters of all the local interfaces.

4.5.1. Timeseries

The Historical Data tab of the Interface Details page shows the interface timeseries (traffic, packets, flows, …) of all the local interfaces. Pick the timeseries in the dropdown and the time range as for a regular interface.

By default the chart shows the aggregated timeseries: the sum of all the interfaces. The comparison with the previous period (e.g. 30m ago) and the statistics table (average, 95th percentile, max, min, total) refer to the sum.

Aggregated timeseries

Aggregated timeseries (sum of all the interfaces)

Enabling the Stacked toggle on the chart splits the sum into one series per interface, stacked on top of each other, so that the contribution of each interface to the total is visible. Each series is labeled with the interface name (e.g. Sent (enp1s0), Rcvd (enp7s0)), and the statistics table lists one row per interface. In this mode both sent and received traffic are drawn above the axis, so the top of the stack is the total traffic. Interfaces with no traffic in the selected time range are not shown. Disable the toggle to go back to the aggregated view; the choice is remembered for the next visits.

Per-interface stacked timeseries

Per-interface timeseries, stacked

4.6. Alerts

When ClickHouse is enabled, the Alerts Explorer is available in the light view and lists the alerts of all the interfaces, both engaged and past alerts. All the explorer actions work on the whole set of alerts: filters, acknowledging and deleting alerts, and opening alert details.

Actions that refer to a single interface, such as the live flows of a host or the extraction of the traffic of a flow from the traffic recording, require jumping on the actual interface.

Note

Alerts are only available in the light view when ClickHouse is enabled. With the default (SQLite) alert database, the Alerts menu is disabled in the light view.